Just trying to figure out what services (i.e. Netbios, NNTP, H323,telnet, etc.)    I can block in the PACE 5268AC router without affecting the DirectTV receivers / satellite Dish, etc. connected to the router.

I have allowed and port forwarded four ports inbound to my PC. Two of them work and two do not. This trouble only began within this past week. The first two that work are HTTP services on unregistered port numbers (not 80 nor 443). The last two that do not work are FTP and MS-RDP which are also on u

I have just had a full U-verse package (TV, Phone, Internet) installed.  The modem is a 3801 HGV. The firewall settings (Settings->Firewall->Advanced Configuration), under the heading "Outbound Protocol Control", lists allowed outbound protocols.  Missing from the list is 'ssh'.  Would 'ssh' be incl

I have a Pace 5268ac residential gateway and purchased a block of 8 static IPs. The installation tech said my RG static IP is 76.221.184.30 and my usable IPs are 76.221.184.25-29. Two questions arise: 1) I don't see the static IP(s) anywhere in the RG admin screens. The "public IP" is listed as 104.

Before I purchased my ATT Home Base (ZTE Z700A), I had confirmed with multiple AT&T employees that it would do what I would like to do:I would like to enable in-bound connectivity & NAT for Remote Desktop (using either TCP/UDP 3389), HTTP, FTP, and a few other ports for various services. The options

I've got the 5 usable statics. I use a linux server to act as my router.  The linux server is also a web and mail server plus some other services.   I've configured the 5268ac to put the linux server in dmzplus mode so it should be open in and out.  Everything has been working but

I just got a Roku stick, and I can't get it to connect.  It appears that the firewall is stopping it.   I've tried entered the MAC address, and that doesn't help.   Is there a Roku profile I can add to the firewall? The firewall log says this: src=92.252.136.157dst=99.112.238.69ipprot=6sport=35179dp

I have a block of 5 IP addresses.  I have hosts behind them, both are running HTTP and HTTPS.  I am intermittently able to connect to the linux system on 80 and 443.  I am not able to connect to the other host at all on either 80, 443, or 8080 where its management interface is.  The linux system is

Hi - The subject says it all. I want to be able to enter by hand a list of IP addresses to block, but in the AT&T supplied McAfee Security Center i can't find anywhere to do it. Possible? thanks

A few days ago I started having an issue with my WiFi connection on all devices that have always worked correctly when connected. The devices  (iPhone, iPads and Samsung Galaxy S9) started acting as if the internet connection was lost. This only happens based on what I’m trying to access. The browse

Hello, I need help setting up my open vpn on Netgear R7500 v2. I followed all the instructions provided by netgear however I was not able to connect successfully via openvpn. I have Arris BGW210-700 with Netgear connected to it. Do I need to open any ports or do ip passthrough? Appreciate any help o

I am on my second modem and cannot get the fire wall to allow me to remote desktop into my pc.  Prior to the last two modems I had this up and working with no issues, I had a connectivity issue and they sent me a new modem. Then sent me another. I now have a:Manufacturer: Pace PlcModel: 5268AC I hav

We have Uverse Gigapower using an ARRIS NVG599. I have port forwarding setup for port 8080 to point to a specific machine. When I attempt to telnet to this port, the connection is refused. When I run an external port scan, it shows closed, which they define this as the port is responding but nothing

I have the wireless internet homebase mf279.  I’m trying to set it up to have an open NAT on my Xbox.  I have it hooked up straight to my Xbox through the Ethernet cord provided.  I have tried port forwarding, enabling uPnP, and also tried putting my Xbox IP address into the dmz mode on my routers s

Hello I have recently changed to ATT internet about 3 days ago. Since my switch to ATT Internet my security camera is unable to successfully upload the pictures and videos captured from my camera to my centralized storage on my computer, which is set up as an FTP server. I had issues with accessing

The McAfee firewall prevents the use of the AirPort Time Capsule and the AirPort Express which may have a printer attached.  The McAfee firewall has to be turned off permantly in order for the Mac to be functional in these ways.  This should be corrected in the McAfee software for AT&T Security Suit

Is there any way to see a computer sitting behind my AT&T Wireless Internet device model MF279? I am assuming that AT&T assigns the dynamic IP so it would be a moving target. If I know what that moving target is at any one time, and assuming I've opened ports in the firewall, is there a way I can I

Community: I have a question about the Motorola NVG589 and am hoping you can either confirm the posts I am reviewing, or at least give me the correct terminoligy to further troubleshoot my problem.  The post I am reviewing are: Features-and-How-To/How-to-put-the-Motorola-NVG589-in-bridge-mode-or-as-

I have business uverse.  My machines behind the router pull ipv6 via dhcp.  I have poor ipv6 connectivity.  The uverse router's firewall log is showing: How can I stop the uverse router from blocking valid ipv6 traffic to my servers? noticeJan 12 14:32:03IN=br0 MAC=14:ed:bb:b2:89:a9 src=2602:306:381

Hey there, I am having U-Verse installed soon and I was wondering if I would be able to use my Juniper SRX240 in place of the NVG589. Has anyone done this before? Is it possible? Thank you.