I had Comcast with my own Asus RT-N16 running tomato.  ATT just installed fiber into my neighborhood so I got it set up yesterday for 1000mb.  I want to use my Asus router because I have a number of items with static IP's and Ports.  Plus, I'm a data junkie and love seeing usage stats, etc.  I've re

I have been reading the forum all afternoon and have decided that I am not simply failing to read enough to find my answer. I need to be able to plug a device into an ethernet outlet in a location that I cannot get a cable to.  My gateway (RG) in in my office closet and I need for it to talk to a de

Ok I have a permanent vpn to my workplace on my pfsense firewall. Before I was on Time Warner Cable and had the modem in bridge mode and wifi off.  The DIR-815 was also in bridge mode, though it had an IP from DHCP and could be managed that way, but it left the IP assignment to the pfsense fir

Hey y'all, at my business, we have Uverse coming into the main modem/router, and then have a Apple AirPort Time Capsule ethernetted off that, then about 6 other Apple AirPort extremes ethernetted off the main Apple router. All of the Apple routers are running in bridge mode, allowing the main AT&T m

Just switched from DSL (Motorola 2210) to UVerse (Motorola NVG510). I set the 2210 into bridge mode and ran my home network from an Apple Airport Extreme Base Station (AEBS). I have some complex configurations on my network and figured I'd be able to do the same thing with the NVG510. However, it se

People say it's a lot like the 2Wire 3600, but the menus don't look the same to me. I Happily follow instructions with screenshots. My local tech geek is not able to handle this for some reason... Help?

Hello! I've got Uverse TV service (via a 3800GHV-B router), and I'm thinking about adding UVerse Internet Service too.  However, I am worried.  I need to keep my current router, a Linksys, due to a highly specialized network setup that the 3800 cannot manage.  From what I am reading, I would need to

Hi, I've seen multiple postings, with many suggested alternatives for placing a second wireless router behind my already-setup Motorola NVG589 Uverse RG. Can anyone direct me to DEFINITIVE instructions on how to configure the second wireless network behind the NVG589? My desired configuration is the

Problem:  I need to use my own router as I need network USB printing.  The BGW210 has no provisions for this. Description:  When I connect my ASUS router to the BGW210, for the most part, the router works fine.  Both the wired and wireless devices connect with expected speed.   However, use of the r

Learn how to set up your own router The Arris BGW210-700 BGW320 is an advanced residential gateway that supports VoIP, IPv6, video delivery, security firewall, and extensive remote management features.    The BGW210-700 Broadband Gateway delivers robust video, primary line telephony, and

So, I have had Time Warner Cable Internet for a few years and am paying a little bit too much for just internet (I already have U-Verse TV through AT&T). So, I decided to go ahead and bundle AT&T internet with my U200 TV. I have a couple Questions:in my area the fastest speed internet offered was th

I have followed the instructions as suggested on https://forums.att.com/t5/Features-and-How-To/How-to-put-the-Motorola-NVG589-in-bridge-mode-or-as-close-as-you/m-p/3552057#M39255as well as some of the alternative setups people have suggested in replies but I am unable to get any connection through m

I have a 2wire 3801 and am trying to connect a Lutron SmartBridge to control lighting, etc. I am plugging the cable to all ethernet ports and it will not detect anything. What am I doing wrong?

I'm trying to set up a router for internal (home) use only, no access from the internet.I have AT&T's 3800HGV 2Wire modem, a D-Link router, and a Netgear router. Both routers are connected to the 2Wire. The 2Wire configuration screen shows the Netgear router as having address 192.168.1.12.The D-Link

I have followed all of the steps in the solution of this:https://forums.att.com/t5/AT-T-Internet-Equipment/I-have-a-Pace-5268AC-Router-how-to-put-it-in-Bridge-Mode/td-p/4330866The Pace sees my router and is allowing it however when I plug in the ethernet cord to my router I get nothing, no Wi-Fi or

I am trying to configure my BGW210 to run in as close to bridge mode as I can get. I've pulled up guides and walkthroughs for this but every time I believe I've configured it properly I just get no network connection. right now I've left the BGW210 stock reset except turned off wifi and piped the co

Hi all, I used to have 3600 with DMZ setting for one server. Everything was working ok. Last week I upgraded to NVG599 U-verse Gateway, now I'm not able to make IP Passthrough working. I have tried some different setups. The Server is not changing the local IP address for the Public IP address lik

I recently signed up for 1gig fiber and have disabled the wireless on the AT&T modem/router, and am using my own Linksys ac5400 router. I setup passthrough on the BGW210-700 modem/router for the Linksys router, and set the Linksys router up as a bridge. I am getting 800/800 when connected via LAN on

I have configured the Motorola NVG589 in 'bridge' mode according to these instructions. It works great on my wireless network served by the ASUS RT-AC68R. I also have a HomePNA bridge (Motorola TER-HCNA2) over coax connected to the NVG589 to extend the network. However, I can't connect to either the

I just moved into a new place that already has a AT&T internet using an Arris BGW210 modem/router, but my Macbook won't connect to the WiFi for some reason, even though my iPad, Android Phone, and Apple TV all connected without any issue whatsoever. A little research on the problem seemed to suggest