I am a newbie and I am wanting to connect an Access Point to my BGW210 in order to boost the signal throughout my house - rather than using WIFI extenders. Does the BGW210 support Power over Ethernet on the ethernet ports?   In other words, does the BGW210 supply the "power" over the ethernet connec

I am wanting to move my BGW210-700 gateway about 15 feet from where it is currently setup to get it closer to the middle of our house. Right now the Ethernet cable in ONT port is too short, and I just need to get a longer cable. However, I want to make sure I get the right cable for ONT port. Does a

BGW210-700 running firmware 1.5.12. All port forwarding works except for 80 & 443.  I have a certain application that only likes to operate on 80/443.  I could change it but I have people that need to access it and I don't want them to have to put in the URL with a port added to it.  I had this port

Issues:Disconnects from the internet frequently. When i do a "full diagnostic" it fails at the DSL part.Port Forwarding isn't working. I heard it was because of the 1.6.7 firmware update.  Light Blinks Red and Green. The internet (when it's up) is slower than usual.During Downtime, The "Line State",

Recently upgraded from Internet 12 to Internet 50 and with that came a BGW210-700 modem/router.  After setting up Port Forwarding for my cameras and a web stream, I noticed nothing was working.  I rebooted the system and voila!  Everything worked... for a moment.  (Full disclosure... this has been s

Can i override the automatic assignment of 5.0 Ghz to 2.4 Ghz for 1 device.without having to convert to using the 2 different SSID'S. My Nest thermostat only works on 2.4.and BGW210 is assigning it 5 Ghz

The short version: The BGW210-700 WiFi is awful. Disabling its WiFi and connecting a TP-Link Archer C2300 in Access Point mode resolved all of my WiFi issues. My system: ATT Fiber 300. Wired devices include: Marantz AV7005 AV Preamp, Synology DS218+ NAS (used mainly for streaming my iTunes library b

For years I have had ATT with a 2-Wire modem and had zero problems accessing my surveillance cameras from outside of my home network. The 2-Wire had the option to create a pinhole in the firewall and assign a port number to each device and I could access them when away from home using the public IP

Needing detailed instruction to set up BGW210 in passthrough mode to Asus RT5300.

I have had many major problems ever since July 18, 2018 when AT&T was at my residence to install the Broadband 1000 Fiber Service for both Internet and U-verse. So, it has been 42 days now with constant problems which I have researched and experimented with to the extent of determining the fact that

I ordered ATT Fiber and it was installed on 12/20/2018. The speed is nice. The installer was great. He ran the wires where I wanted and put the ONT where I wanted. However, he gave me the PACE 5286AC. I've been fighting with this thing over various things for weeks. For what it's worth, I had my own

This is a real puzzler and I've had both AT&T and Dell on the phone about it. I still have the Comcast internet active and I get 80Mbps (wireless) when I switch to that. When I switch back to the fiber connection, it maxes out at 5Mbps. An iPad right next to the Dell gets 240Mbps. I've reinstalled t

I am new to this, so please forgive me if I am completely incorrect, but I am currently trying to configure my router so that I can control which devices have access to my SSIDs.  I apparently have two SSID's--one is 2.4 Ghz and the other is 5.0 Ghz.  I am not exactly sure the significance other tha

I recently had a Arris BGW210-700 installed with 100MBit service, we upgraded from 12MBit ADSL. My Samsung UN32J5205AF was working fine connected to WIFI, streaming apps (Netflix, Hulu, Amazon Prime) worked fine and services were usable across the board. Now, since upgrading the RG and service, my T

Modem constantly resets and drops connections.Log reads "invalid ip packet"Firewall is offIP passthrough is enabledPlease help

Im trying have my BGW210 to be a modem only while using my EA9500 to do the "routing", portforwarding, etc...   I turned on IP Passthrough but my EA9500 router is not showing my public IP.  I searched the forums and see lots of posts about it and tried the resolutions posted but didn't work for me.

I set up a custom service in NAT/Gaming to forward port 3389 to my PC. On my old cisco router, this was easy as pie and it just worked. ATT came and replaced it with this new Arris one and I can't get it to work. Apparently no one on the internet has figured it out either. I really don't care if you

EDIT: Solved - Reset IP under ATT Modem - 30s power cycle did not fix the issue. Found the button while poking through menus. Diagnostics>resets>ResetIP   currently have a bgw210-700 on 1.6.9. IPV6 was working last time i checked, a month ago?, now nothing. anyone else with similar

I signed up ATT fiber internet with this modem BGW210 almost 2 weeks and there are 3 tech visits already with issue. First Tech  came with 5268 but it made high pitch noise, then they brought BGW210 but Wi-Fi drops so badly even after the firmware update. It feels slower than dialup for google searc