In the Arris BGW210-700 Broadband Gateway Install and Operations Guide, this title is listed as "Related Documentation". I would like to have and save a copy of it.

I have various devices on my home network (mostly my work laptop and my gaming PC; both with Windows 10) that repeatedly lose connectivity with the internet even though the broadband light on my modem stays solid.  (It's a BGW210 with software version 2.3.4.) For the duration of the connection inter

I want the combined modem-router's wifi off at all times except when I want to stream to my TV set. So ...(1) How do I get to the configuration screens, and(2) How do I turn the wifi on and off?

I am trying to configure my BGW210 to run in as close to bridge mode as I can get. I've pulled up guides and walkthroughs for this but every time I believe I've configured it properly I just get no network connection. right now I've left the BGW210 stock reset except turned off wifi and piped the co

So I recently upgraded my internet to the internet 45 package with the bgw210 router and ever since then I have been having extreme lag spikes whenever I play a game or watch shows on my network. I never experienced this with my old internet, why am I having these problems now, with the new "stronge

I recently got the BGW210 do to an internet repair and I'm currently thinking of upgrading to Internet 45, does the BGW210 support this plan?

When I don't have band shaping on, my wifi connection is stable using either 5ghz or 2.4ghz.  However, when I turn Band Steering on, either my device will randomly disconnect and then reconnect to wifi or the internet will stop working on the device, and I will have to disconnect and reconnect to wi

Powerline adapters such as AV200 can cause havoc with BGW210 modems: internet traffic virtually dies. History:  Old modem was connected to a 16 port switch.  One of the ports on the switch went to an AV-200 PowerLine adapter adjacent to the switch.  Five rooms in house had matching AV-200 and all wo

I have 1 Gbps U-Verse and a relatively new Arris BGW210-700 residential gateway I got after upgrading from a Pace that's setup on the 192.168.1.x subnet.  I also have an ASUS router setup as a passthrough that I'm using on the 192.168.50.x subnet.  Everything is running well in terms of internet acc

I just moved into a new place that already has a AT&T internet using an Arris BGW210 modem/router, but my Macbook won't connect to the WiFi for some reason, even though my iPad, Android Phone, and Apple TV all connected without any issue whatsoever. A little research on the problem seemed to suggest

I am trying to setup my dual WAN Linksys LRT224 router so that I have comcast (standard comcast cable modem) as my main WAN connection and AT&T ( BGW210) as my failover backup WAN connection.  The problem I am having is when I try to simulate a failover situation by unplugging the comcast cable.  I

I have two digital voice lines (VOIP). Over the past two months both lines are dropping calls and this is happening progressively more frequently. I suspect that I have a gateway that is starting to fail.Symptoms: Either one or both lines may be in use, it doesn't seem to matter. The line/conversati

I recently had fiber installed and am happy to be back with Uverse TV after a brief interlude with Spectrum TV service that just isn't as good or as user-friendly.  (I moved and ATT is just now available at my new location, so Spectrum filled the gap for a couple of months). I need to obtain an Arri

Hi, could At&t consider allowing replacing the arris bgw210-700 with a customer-owned router/gateway. The condition would be: If you replace the ATT provided gateway there will be absolutely no support by ATT. Att Support will only respond if the arris router is in place. A lot of us who opted for A

(Note: Apologies for the formatting, although this MCE editor allows indents, the back-end scrubs them out.) Hello World, I'm at a bit of a loss after troubleshooting for the past few days.   Over the past two weeks--excluding 02/09 - 02/11--the following setup has been working perfectly.

Hello All,(Internet Connection: AT&T Fiber/Gigapower 1000) Network SetupHome Network is set up as follows: Fiber "translator" box (what the fiber wire is fed to from outside of the homesu10) connects to the Gateway (ARRIS BGW210) via CAT6 ethernet; Gateway is configured for IP Passthrough - DHCP Fix

My BGW got the latest firmare 1.6.9. I am running a security camera management server on one of my PCs at home. To access the server from the internet I setup an open port on BGW210 which forwards the packets from a client on the internet to that PC. Running canyouseeme.org confirms that the port is

I just had my gateway changed from an old 2-wire/Pace brand to a BGW210-700 but realized that the Belkin BBU barrel connector doesn't fit.  Does anyone know of the easiest way to adapt it (since we no longer have a Radio Shack).I have a disabled person living here so it's important to have a working

I am a newbie and I am wanting to connect an Access Point to my BGW210 in order to boost the signal throughout my house - rather than using WIFI extenders. Does the BGW210 support Power over Ethernet on the ethernet ports?   In other words, does the BGW210 supply the "power" over the ethernet connec

I have moved my service to a new address last week and now with a new Aris BGW210 all working but when I try to add the Cascaded Route option to add my static IP the modem take 20s and show session refused and not take the config and requires me to reboot the modem to be able to connect back on the