I currently have the 18M U-verse internet service, a 3800HGV-B, and a block of 5 IP's. I have created pinholes to allow access to my devices using the static IP's. I'm considering upgrading to the 24M U-verse service which is about the same monthly cost, but this would require a change from the 3800

Ever since I unplugged my router 5268ac, and then plugged it back on, it does not start up. The only thing that happens after plugging it is that the power flashes green, then stays solid for half a second, and then continues flashing green, and it has been doing this for 2 days now. I can’t find a

Internet was working fine until account got suspended I paid the bill yesterday in full. When I came home I plugged the power back into the box lights all when green  . when I connect my lg it says connected no internet , fire stick connected with problems, Xbox can't update it and laptop connects a

Greetings.Really quick, how can I get the NEW 5268AC work with a Netgear R7000 router?  Basicilly I want the Netgear to do ALL the work; DHCP, Wireless, etc.  I just need the 5258AC to connect.In addition, I have static IP addresses that I need the the R7000 to be able to use since I use it to acces

Hello I have recently changed to ATT internet about 3 days ago. Since my switch to ATT Internet my security camera is unable to successfully upload the pictures and videos captured from my camera to my centralized storage on my computer, which is set up as an FTP server. I had issues with accessing

I just purchased and installed a Pace internal battery for my 5268ac gateway.  (Disappointed that it did not come with one.)  When first installing it, the 'battery' light on the gateway stayed on continuously.  Now, after several hours, the battery light is blinking rapidly.  Does that signal troub

I have the gigapower modem 5268ac and I see an extra wifi signal that has no name and is unknown.Does this wifi modem broadcast a signal for a public hotspot?If so, how can I turn it off?My internet connections have really slowed down here recently.

When I try to plug the Netgear GS208 switch into the 5268AC gateway, the gateway shuts off the Ethernet port. I can verify that the port is off with a bright orange led on the connection.  Also, I can verify on the 192.168.1.254 site that the wired ethernet port is down.  If I switch port

I just switched from Cox cable internet to AT&T fiber internet 50 with a PACE 5368ac gateway, and I am having a lot of issues. Internet drops out multiple times daily, and even though the router is located in the exact same place as my old Cox router (Netgear DN6300, which they no longer offer), the

In the past I've blocked suspicious URLs / IPs / known ad servers at the level of the gateway / router. I don't see an option for blocking Specific URLs/ IP addresses that we commonly see with a netgear router in the  PACE 5268AC. Anyone know of any work around for this? This appears to be a rather

Hello, I run my home network behind a 3rd party router and I have a webserver etc. so I have a static IP address allocation from AT&T.   Can someone please help explain the differences between using a cascaded router configuration vs. assigning Public/Fixed LAN mappings (as per be

Pace 5268 - I have IPv6 support "on" in my home network - and have "Prefix delegation" and "Address Assignment" both enabled. The trouble is with IPv6 "SLAAC" addresses - these are all registered with DNS and *never* seem to go away - even after being deprecated and then removed from the v6 interfac

I've only been a Gigapower user for about 2 weeks now, but I've already experimented with quite a few different configurations for my home network.I'm finding that I get the best throughput on both wired and wireless by using the Pace 5268AC in DMZ+ mode, and using my existing Netgear R7000 as my ro

No wifi on one of our networks for all Apple devices.  Only device able to connect to Uverse is Dell laptop without any drops in signal.  The workaround was setting up static ip and this was working. Now everytime we try to use method it ask for password over and over and no connect.Who should I cal

I have a Pace 5268AC Uverse router. I found out my Western Digital (WD) My Cloud does not plug and play to the port on back of the router. The My Cloud would show no Ethernet lights, whereas connected directly to a laptop via Ethernet the Ethernet activity lights worked fine. I attached a TP-Link sw

I have a 5268AC router with Gigapower 1-gig service. The router is located in my basement, and I have a separate wireless access point connected to the router by Ethernet, running a 5GHz network. I have the 5268AC broadcasting a 2.4GHz network that all the legacy devices in my house connect to. Inte

Looking for detailed, step by step instructions on how to get my NAT Type set to open on my Xbox One. I have the AT&T Model 5268AC. Thanks

I am having an issue that I have tried to report to the ATT tech support team but I am not able to get any help.  (I have an NVG599 being shipped but I wanted to report this issue just because the Pace has better specs)   This is my problem.  When I enable the 2.4ghz wifi on the modem, I get a brief

I was experimenting to find the best equipment to use for my gigabit fiber service, and so far tried using an ASUS RT-68U as well as the AT&T Pace 5268ac. The asus router could not reach the full download speed of my fiber service, and on speed tests was reaching at most 600mbps down, but, it did re

Can someone please provide some asistance with linking my netgear ac750ac range extender to my att uverse 5268ac pace router?  I have looked up topics and they talk about not releasing dchp and changing settings and it all seemed pretty confusing. Is there any better detailed soultions that anyone h