After all kinds of problems, I had my old modem replaced with the 5268AC. I've had to remove my Apple WiFi Network and use the ATT router's WiFi. I can't get programs and music to play on my Apple TVs on this 5268 WiFi network if they are sitting on my NAS. If I replace it with the Apple one, they a

I maintain a Remote Desktop Connection to my computer at home (AT&T Fiber Internet) from work, due to the fact that I don't want any personal information on my work computer.  This Remote Desktop Connection was solid while I had cable internet service, but since I switched to AT&T Fiber Internet ser

I recently switched to AT&T and was given a PACE 5268AC. I changed the SSID and password, along with the WiFi channels, but nothing else. I reconfigured my previous router (An TP-Link Archer C7, which I had used in bridge mode with my previous ISP) in bridge mode with the DHCP server disabled (made

I have a recently moved from Charter and had AT&T U-Verse 5268AC installed for internet-only service since AT&T now delivers 45mbps service in my area. I do not use this box for TV or landline. I’m also an existing Apple Airport user (Extreme 6th Gen tower, Extreme 4th Gen, Airport Express).

Its blinking green since yesterday, i tried to restart and reset it doesnt help.the router does not respond to any button

Service, WiFi, Power, and Broadband lights are all green, but I am getting no internet.  Is there a possible reason as to why this is happening and how can I fix it?

Hello, After reading all of the recent comments related to port forwarding issue on this appliance(5268AC), I still don’t seem to understand if there is any solution. Can someone clarify if there is any way to make the ‘pinhole’ concept work to avoid using the DMZ/Bridge to personal router as worka

When I don't have band shaping on, my wifi connection is stable using either 5ghz or 2.4ghz.  However, when I turn Band Steering on, either my device will randomly disconnect and then reconnect to wifi or the internet will stop working on the device, and I will have to disconnect and reconnect to wi

Hi,I have my Asus router configure as previously described DMZplus zone with pace. All my computers are going through the router and I have no issue. The problem I have is that from outside my router ports  are closed - so I cannot use VPN, WOL and other . Obviously I have create port forwarding in

Sigh. I signed up for AT&T Fiber, couldn't find any way to ask pre-sales questions, and hoped that, in 2018, I wouldn't end up with hardware that couldn't be fit into my home LAN. I fear I'm about to be disappointed. Here's my situation: I am switching over from Comcast cable. I have a Cisco RV320 G

Our modem reboots frequently, one to six times per day.  The problem has been going on for six years without resolution.  Others in our area have the same problem.  We had many techs out, including senior techs.  They've replaced every line on our street and right up to the modem.  The problem conti

I recently had fiber installed and am happy to be back with Uverse TV after a brief interlude with Spectrum TV service that just isn't as good or as user-friendly.  (I moved and ATT is just now available at my new location, so Spectrum filled the gap for a couple of months). I need to obtain an Arri

my equipment spitting out this error trying to connect to ATT err Oct 30 18:21:27 daemon: httpd[1687]: OpenSSL error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol err Oct 30 18:21:13 daemon: httpd[1687]: OpenSSL error:14094418:SSL routines:ssl3_rea

Since my firmware was recently updated over the weekend I now have 5268ac showing up in the device list as active on the 5GHz band. 5268ac has it's own IP address and in the SSID column it shows ? for SSID. Is this normal? Why is the RG model number now showing up as a connected device with it's own

From what I'm reading on the web, even business tier is getting set up on the 5268AC, which leads me to believe that I'm stuck with this device. To help understand where I'm coming from, here is the background that leads me to ask this question:I switched from Xfinity to AT&T GigaPower fiber a coupl

I have consistently seen long delays / stalling when trying to access the internet from my iPhone 6s Plus when connected to our AT&T router 5268AC.  Every so often I'll browse to a web site, and the browser will just hang there -- sometimes for 10-30 seconds.  I've noticed if I were to turn off wi-f

I do not see a power button on the device. So if I need to reboot the router, do I just unplug the power cable and plug it in back? Or is there a better way?

I am a network administrator and engineer with 30 years of experience. I have become very concerned about a problem regarding the Pace 5268ac router issued by AT&T. A couple of years ago, I ordered GigaPower fiber service from AT&T after it became available in my neighborhood. I was issu

I have been seeing this problem for several weeks, and have finally narrowed down the cause. My ATT Fiber to the Premises (Gigapower) Internet connection runs at or above rated speed under normal circumstances.ATT does not allow for proper bridge mode.The only way to send all unfiltered traffic to m

I recently had fixed wireless Internet installed - AT&T supplied a 5268AC gateway with the system. The wifi doesn't reach far enough in my home, so I wanted to use my TP-Link AC2300 router as an access point, as the radio seems stronger. Unfortunately, the several procedures I took to connect the tw