I had trouble activating my microcell--it was stuck doing NOTHING, after following directions carefully three or four times.  AT&T secondary support verified I was doing all the required steps, and sent me to my ISP.  It took a while to get to their (really) technical support, but after I did, Joe l

So, I have found all kinds of solutions to place the NVG510 into a "bridge mode" on the internet and old forums, but now as of 4/xx/2013 they say it can't be done anymore.  So I asked for a Motorola 2210, as that is what I used at my business location to set up passthrough mode so we could run our b

Nobody from AT&T can seem to answer this so I turn to you knowledgeable folks!In short, my Uverse internet and cable service is set to be installed on Saturday 6/22. The question that nobody from AT&T can't seem to answer is how I would set up my network with their hardware. I do a lot of intra-netw

I have worked out a way to simulate full bridged mode between a U-Verse RG and an enterprise grade router.   It's not identical to uverse in bridged mode, but it is pretty close.   Prerequisites: AT&T U-Verse VDSL service with the Static IP add-on. (I'll be using the 8-ip block in this case) A rout

I was quite excited to be the first in the neighborhood to have fiber installed, I guess it was we never received any advertisements that it was available. It took a few weeks, but despite controversy about whether it really was available we had it installed.  The first AIO modem/router had some gre

I've just installed Google Wifi wireless router on my Uverse network.  The Google router insists on using subnet 192.186.86.xx for everything connected to it (everything that's wireless).  My Uverse router (NVG599) uses 192.168.1.xx (everything that's wired).  Everything works fine except my printer

Hey y'all, at my business, we have Uverse coming into the main modem/router, and then have a Apple AirPort Time Capsule ethernetted off that, then about 6 other Apple AirPort extremes ethernetted off the main Apple router. All of the Apple routers are running in bridge mode, allowing the main AT&T m

I just attached a Norton CORE to the ATT PACE 5268AC.  The CORE software suggests I place the PACE in Bridge mode so it is not also routing traffic.  I have tried to find out how on various ATT sites and cannot .  How do I do this?

I setup my Pace Residential Gateway with an Asus RT-AC66-U router. I only have U-Verse Internet and Phone no TV service.Everything is working fine with the devices connect Wired and Wireless from the Asus Router. I have the Wireless turned off on the Pace Gateway and just have a small DHCP Range. Th

Looking for help on how to bridge the gateway and optimize some settings.I am having difficulty getting in to the network settings since I complained to ATT yesterday and also had to create a new message board account:) I originally signed up for fiber 100/100 but had to bundle TV with it since ther

I just ordered Fixed Wireless. Currently I have AT&T DSL Elite Pro, at 6mb speed.  My $350 Asus RT-AC3100 gaming router is set up perfectly for all the things I use in my home and works flawlessly. I do not want to stop using this expensive and very capable, fast router in exchange for AT&T's gatewa

Overview Most people don't need advanced features that personally owned routers offer and will be just fine using the NVG589 and turning off their personally owned router. But if you're like me (and I know I am!) then you are probably reading this thread because you have ip cameras, personal cloud

... on Pace gateway? Will the TP-Link AC2300 router's firewall provide sufficient protection since it will now have a public ip? In this configuration, if I turn RG's wireless off, will the only way to access settings then be by directly connecting a pc via ethernet? Can I setup an additional router

I have followed all of the steps in the solution of this:https://forums.att.com/t5/AT-T-Internet-Equipment/I-have-a-Pace-5268AC-Router-how-to-put-it-in-Bridge-Mode/td-p/4330866The Pace sees my router and is allowing it however when I plug in the ethernet cord to my router I get nothing, no Wi-Fi or

     Streaming Issues? Connect your computer Connect other devices to your Wi-Fi Network Connect your 3rd party devices Find your Wi-Fi Information How to Change your Wi-Fi Password and Network Name (SSID) on NVG How to Change your Wi-Fi Password and Network Name (SSI

I want to create a roaming network in my house to distribute wifi to areas not covered by the wifi from the RG NVG599.  My solution is to connect the Apple Airport Extreme to an ethernet switch in the attic that distributes the same ethernet to two other set top boxes. The attic is an ideal location

Ok, I need my RG ( NVG589 ) set up as bridge mode. 1. is it possible ?2. how do I do this without paying  $15 for paid tech support(Imaging "tech" clicking a drop-down "bridge mode - active" )3. Bridge mode == Bridge mode.   no work arounds, no "DMZ", no "redirect traffic to router ip".  I just want

I recently switched to AT&T and was given a PACE 5268AC. I changed the SSID and password, along with the WiFi channels, but nothing else. I reconfigured my previous router (An TP-Link Archer C7, which I had used in bridge mode with my previous ISP) in bridge mode with the DHCP server disabled (made

New to Comcast as my IP,  bought my own Arris Modem Router with phone line ports, then Comcast loaded their firmware on to it so now logging in to it, it looks just like a Comcast router.  A little background, When I first set up Comcast gateway, I set the Firewall settings high can't remember the t

I need help asap with my modem, it is an AT&T Modem, the model is MF279. I just bought a Nighthawk XR700 Gaming Router and my kid's Xbox is showing that the NAT Type is strict and there is a double NAT. I looked at some articles and it says to put the modem in bridge mode, but I can't see that optio