Skip to main content
AT&T Community Forums

Contributor

 • 

2 Messages

Sat, Mar 10, 2018 4:06 PM

We bought an ONN TV and can't seem to program it to our directv remote

Can't locate a code for the ONN TV

 

Responses

Accepted Solution

Official Solution

Teacher

 • 

7 Messages

2 years ago

To program your direct TV genie remote to your ONN tv, choose RCA as the brand and choose idk my model number and it will search, select the 4th code it will work! 

New Member

 • 

1 Message

i had to go to #15 to connect to direct tv remote but the audio still doesnt connect. What am i doing wrong?

Accepted Solution

Timewarpone

Teacher

 • 

13 Messages

a year ago

ONN TV's are built by Durabrand. It is listed as a remote program choice. There are several codes to choose from. I don't know which code number will specifically work for you. You may have to try a few to see if which one works for you.

Good Luck

New Member

 • 

1 Message

yes durabrand code worked for me thank you!!

New Member

 • 

1 Message

Accurate even on a spectrum remote. Thanks ibe been looking through codes for atleast an hour.

New Member

 • 

1 Message

@Timewarpone Thank you, this worked perfectly. We were pulling our hair out and then I found your post! Thank you!!!!!

New Member

 • 

3 Messages

@Timewarpone it was Duranbrand that worked for me too. I had tried Element, RCA, and the "Manual find" method, and they all failed. The "find" method got me to the point that I can turn it off, and use the Volume control. But not the "On" feature. Always had to get the ROKU remote for that.

 

New Member

 • 

1 Message

Durabrand works for everything except turning TV on for us.  Tried all 10 choices and there’s two that work like that.   Is there a choice that will also turn the TV on?

Tutor

 • 

4 Messages

3 years ago

I need the code for an ONN tv 

New Member

 • 

11 Messages

@Meballew I used code 12434 and it worked for me.

New Member

 • 

3 Messages

@Shadowears

Thank you for posting the code you used. This code definitely worked for me! Thanks again

litzdog911

ACE - Sage

 • 

53.3K Messages

3 years ago

What model remote control?

What model DVR/Receiver?

 

Start here .... https://forums.att.com/t5/Remote-Controls/Having-trouble-with-your-DIRECTV-remote/m-p/4880120#M27028

 

____________________________________
ACEs are customers too, NOT employees. Answers are based on experience. I strive to give honest answers, even if not always appreciated. If you posted personal information, please edit and remove.

For official support call DirecTV 1-800-531-5000 or AT&T 1-800-288-2020.
Award for Community Excellence 2020 Achiever*
*I am not an AT&T employee, and the views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Anonymous

New Member

 • 

25.7K Messages

3 years ago

You can refer to the web site https://support.directv.com/equipment/4028 to program your remote to the TV.

Tutor

 • 

4 Messages

3 years ago

Remote is RC73

receiver is C41-100

Contributor

 • 

1 Message

3 years ago

I need one too for an rc65 remote

New Member

 • 

11 Messages

@abolme I used code 12434 and it worked for me.

Contributor

 • 

1 Message

3 years ago


@Anonymouswrote:

You can refer to the web site https://support.directv.com/equipment/4028 to program your remote to the TV.



Ya... that is the same link directv gives... and does not include the ONN brand. Which is why we're here.

Contributor

 • 

1 Message

3 years ago

 I need a code for the ONN tv, remote is RC 66?

Contributor

 • 

3 Messages

3 years ago

I had the same issue with my new onn tv... But digging in further. I found that inn is owned by Curtis international which is also a rca brand. 

 

It worked at the the 3 or 4th code for the onn 43 in tv that I have ... good luck

Tutor

 • 

4 Messages

3 years ago

Thanks so much. 4th code worked!!!

Tutor

 • 

4 Messages

3 years ago

4th code worked !!! 

Contributor

 • 

2 Messages

2 years ago

What is the code for a onn TV for programming the direct TV remote 

Note: This comment was created from a merged conversation originally titled What is the TV code for onn for the direct tv remote
litzdog911

ACE - Sage

 • 

53.3K Messages

What model remote control?

What model DirecTV DVR/Receiver?

 

Start here ....

https://forums.att.com/t5/Remote-Controls/Having-trouble-with-your-DIRECTV-remote/m-p/4880120#M27028

 

____________________________________
ACEs are customers too, NOT employees. Answers are based on experience. I strive to give honest answers, even if not always appreciated. If you posted personal information, please edit and remove.

For official support call DirecTV 1-800-531-5000 or AT&T 1-800-288-2020.
Award for Community Excellence 2020 Achiever*
*I am not an AT&T employee, and the views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Tutor

 • 

2 Messages

I used the RCA code 12434 and it worked

Tutor

 • 

5 Messages

12434

Contributor

 • 

2 Messages

The RCA 12434 is not on our list of TV choices when trying to program the ONN TV to the direct tv remote. Can you help me?

Contributor

 • 

4 Messages

Pick your CATV then go to don't have model number in let it search codes by on my TV on the 4th try

Contributor

 • 

4 Messages

Pick RCA TV

Contributor

 • 

4 Messages

I just got one of these and I selected durabrand since they make ONN. Hope this helps.

Tutor

 • 

4 Messages

Try using the Vizio brand. It worked for mine. If by chance you have reached your limit on changing your tv type which is 5. If you reset your direct tv box it will go away. Mine paired with the 5th or 6th code that was thrown at my remote/Tv

Contributor

 • 

4 Messages

Thank you! I used the durabrand name and it worked.

Contributor

 • 

2 Messages

I just bought the inn.roku 58” smart tv spent four hours. Trying to program remote and the first code for this worked

Employee

 • 

3 Messages

You could have shared what the first code was.

*I am an AT&T employee, and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.

New Member

 • 

2 Messages

Durabrand

Code 10463

Contributor

 • 

5 Messages

Thank you so much!!! I used the RCA code search and it worked for me also.

New Member

 • 

4 Messages

Just bought an onn roku smart tv, and was able to get durabrand to work on the first code given. Hope this helps😁

New Member

 • 

4 Messages

I have an ONN 55" ROKU Smart TV and trying to program the DirecTV remote. I can change the channels, but doesn't control the volume. The model is not listed. Durabrand and RCA are also not listed. Any ideas?

New Member

 • 

4 Messages

Have you gone to the pair remote option on the direct tv (menu, settings, remote control, change tv, pair remote)? Durabrand should be listed as a selectable tv model, then select "I do not know my model number". First code should work i believe.

New Member

 • 

16 Messages

DO YOU MEAN PARENTAL LOCK TO BLOCK CHANNELS?

New Member

 • 

16 Messages

I HAVE NO IDEA. I PUT A CODE TO BLOCK A BUNCH OF CHANNELS DUE TO CONTENT. BEFORE I SEEN THIS STUFF AND APPS THAT I DIDNT INSTALL ON MY PHONE AND HOOKED TO SOME INTERNET THROUGH DISH, THAT WE NEVER SEEN BEFORE IN 22 YEARS. SOMEONE HOOKED UP EQUIPMENT WE DIDNT HAVE EVER. THEY HAD TO OF BEEN IN OUR HOME TO RECENTLY HOOK IT UP BECAUSE THE SPILITER WAS LOCATED IN OUR GARAGE. NOT HANGING OFF OUR HOME. I KNOW THIS TO BE A FACT BECAUSE I JUST PAINTED THE INSIDE OF THE GARAGE AND UNHOOKED ALL CABLES NOT IN USE. ALSO THERE IS HOLES WHERE YOU ORIGINALLY HOOKED THE EQUIPMENT THAT HAVE BEEN CHANGED AND NEW HOLES IN OUR NEW SIDING. IS THIS A PUBLIC SITE? IF NOT I CAN GIVE YOU THE CODE. BUT I DONT WANT TO POST IT IF NOT

New Member

 • 

16 Messages

@litzdog911 I DONT KNOW WHAT YOUR TALKING ABOUT. WITH THE REMOTE. WE HAVE A PILE OF NEW REMOTES. I AM WONDERING IF SOMEONE ORDERED SOMETHING CHANGED ON OUR SYSTEM AND WASNT US? HOW COULD THIS HAPPEN? SOMEONE SAID ITS POSSIBLY A MINI GENIE? WE DONT HAVE A MINI G. NOT INTETRNET THOUGH YOU AT THIS TIME. WE HAVE BEEN WITH BCT FOR 22 YEARS. I AM VERY CONFUSED.

litzdog911

ACE - Sage

 • 

53.3K Messages

Ummm, sorry, I don't know what you're talking about either. You're responding to a very old thread. You should start your own new post with details about your equipment (model numbers) and exact problem symptoms. Then perhaps we can help. I don't work for DirecTV and I don't know what "BCT" is.

____________________________________
ACEs are customers too, NOT employees. Answers are based on experience. I strive to give honest answers, even if not always appreciated. If you posted personal information, please edit and remove.

For official support call DirecTV 1-800-531-5000 or AT&T 1-800-288-2020.
Award for Community Excellence 2020 Achiever*
*I am not an AT&T employee, and the views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

New Member

 • 

16 Messages

YES IT CAME ON FOR A MINUTE. BUT BACK TO CODE 775

New Member

 • 

16 Messages

WHERE DO YOU FIND THAT CODE? OR IS IT THE PARENTAL CONTROL WHERE I BLOCK ALL CHANNELS DURING NO TV TIME?

New Member

 • 

4 Messages

@crchmley

I have tried all the codes. I can change the channels, but the volume is only available on the TV remote.

New Member

 • 

2 Messages

Same here. I have tried the Durant And first code, then all codes, then all tac, then Vizio as one person suggested. Nothing is working for my onn tv. Direct tv is zero help. Any other suggestions?

New Member

 • 

2 Messages

RCA worked for me too. Thank you :)

New Member

 • 

6 Messages

use orion codescodes 10463, 10236 . 10179

New Member

 • 

6 Messages

i Used orion code for my onn ruku tv. try codes: 10363, 10236, or 10179 ..IT

New Member

 • 

6 Messages

i Used orion code for my onn ruku tv. try codes: 10363, 10236, or 10179 ..IT

Contributor

 • 

8 Messages

For the onn 100012584 43" 4K Roku TV the code was the first Orion TV code checked.

New Member

 • 

2 Messages

I just purchased an ONN soundbar, I tried a few of the suggestions on here and they didn’t work. Can anyone help me?

Brand User
ATTHelp

Community Support

 • 

140.4K Messages

Hey, @Celticpride74. We'd be glad to help you program your new sound bar.

 

Did you try the DIRECTV Remote Trouble article provided by @litzdog911? You may want to give all the steps in it a try to see if you can program it properly afterwards. If that doesn't take care of it, please let us know the models of your remote and receiver, as well as the sound bar.

 

We look forward to your response!

 

Ramses, AT&T Community Specialist

Still need help? Ask a question! Our 1.4 million members typically respond within 1 hour.

*I am an AT&T employee, and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.

New Member

 • 

2 Messages

Thank you everyone. Durabrand was a choice given and it worked on the first search. Thank you so much.

New Member

 • 

3 Messages

Vizio works. It is the 6th code it automatically tried

Tutor

 • 

1 Message

2 years ago

We had the same problem. Put it RCA and then select “I don’t know my Modell number and it worked on the 4th code also!  Good thing too since there are 90 codes to go through

Contributor

 • 

3 Messages

2 years ago

Brilliant solution - just tried it on mine and it worked.  I had thought of trying to emulate another brand but it never occurred to me to find out who owned the ONN brand - again, brilliant! Smiley Happy

Get started...

Ask a new question