One Genie client can't find server other Genie client is fine
I've had Directv's Genie for almost a month and I've had my first, "glitch"..
Today after work we were watching the main dvr unit and my wife changed over to watch the local news. It couldn't lock the channel, then we tried the other locals and none worked. I restarted the main dvr and it was fine, Then I check my client Genies and one worked fine and one doesn't.
The one that doesn't can't find any servers, then after a short wait the video and audio starts but that's it, this client is stuck on stupid. I can't turn it on or off with remote, the only button that works on the remote is the lower left dash and that pops up a dialog box about:
the receiver #
The dialog box offers a blue OK button that I can't click on my remote but if I hit the dash button again it goes away.
The tv is stuck on the last channel before it went Tango Uniform. The volume control on the remote works on the tv and that's it. There is no info, guide, menu, pause, etc. Also, my client tv now has a light grey stripe across the top and bottom of the screen like it's wide screen but the tv is 4/3.
I shut it all down, did the red button resets on all in sequence and no improvement, I go into status on main dvr and it sees my two Genie clients and show no errors so I'm pretty much stumped. The only thing not tried is excess time which I don't a lot of chasing this problem. Perhaps if I leave thhe problem child on maybe it will eventually get the rest of the things working besides one channel which isn't jittery or funky, it's a perfect picture with clear sound but that's it.
Physically, nothing has changed save my blood pressure so I'm sure I've got software voodoo afoot.
Any suggestions are welcomed.