Announcements

For the latest on our response to Coronavirus (COVID-19), click here.

Tutor

 • 

2 Messages

Wed, Jun 13, 2018 12:27 AM

Closed

How do I Program my DIRECTV remote to TCL TV?

How does one get the Directv Remote RC65X to operate selective functions on the TCL 43S403 4k TV. I have tried all the suggestions on the Internet, Directv manual, TCL web site, including programming in 11756 after clearing codes. Help.

Responses

Accepted Solution

Official Solution

Brand User
ATTHelp

Administrator

 • 

112.2K Messages

2 years ago

Good evening @RWS1941,


To program your RC65X remote to work with your TCL 43S403 4k TV follow theses instructions;


  1. Press and hold MUTE and SELECT buttons simultaneously. Release the buttons after the green light at the top of the remote flashes twice.
  2. Enter the 5-digit code 11756
  3. Aiming the remote at the television, press VOLUME UP. (If the volume doesn’t increase, try a different code and repeat steps 2-4. The DIRECTV website has a list of instructions to scan for additional codes. When the volume increases, proceed to step 4.)
  4. Again pressing MUTE and SELECT simultaneously, look for the green light at the top of the remote control to flash twice.
  5. Using the remote control keypad, enter the number 960. The same green light on the remote should flash twice again.
  6. Move the MODE switch to the DIRECTV position.

Thank you for being part of the Community Forums, and have a terrific weekend.


Anthony, AT&T Community Specialist



Still need help? Ask a question! Our 1.4 million members typically respond within 1 hour.

*I am an AT&T employee, and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.

Accepted Solution

Official Solution

Tutor

 • 

2 Messages

2 years ago

Anthony,
I think what gets left out in most directions is that initially one needs to slide the mode switch to TV.

I’m not sure, but the encoding of 960 before sliding the mode switch to Directv may be superfluous. Still need to use “tv input” to select satellite.
Brand User
ATTHelp

Administrator

 • 

112.2K Messages

2 years ago

Hello @RWS1941,


We appreciate your feedback.  I apologize as I think it was I who skipped over you need to switch to “TV Mode”.


Thank you for being part of the Community Forums, and enjoy your weekend.


Anthony, AT&T Community Specialist

Still need help? Ask a question! Our 1.4 million members typically respond within 1 hour.

*I am an AT&T employee, and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.
ATTDmitriyCM

Community Manager

 • 

9.2K Messages

2 years ago

I would like to thank everyone for taking the time to post your comments and opinions related to this subject, and a great solution!

 

This topic is now closed. To discuss a new topic, please use the "Ask A Question" button above.

 

Thank you,

Dmitriy

Rethink Possible


Did a post have an answer that worked for you? Help other users by marking helpful posts as an "Accepted Answer". And don't forget to leave a Like!

Still need help? Ask a question! Our 1.4 million members typically respond within 1 hour.

*I am an AT&T employee, and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.
AT&T TV – All Your Entertainment In One Spot.  Learn more…