For the latest on our response to Coronavirus (COVID-19), click here.
U-Verse, Static IP block, and Sonicwall
I have a Sonicwall firewall sitting behind my AT&T RG (3800) in DMZ Plus mode. the RG has a public IP address of 99.x.x.x.x and 192.168.0.x as provate. The public IP was passed via DHCP to the SonicWall's WAN port. The LAN and WLAN are on subnets 192.168.1.x and 192.168.2.x
I ordered a static IP block in order to configure my SonicWall's SSLVPN. AT&T gave me a x.x.x.192/8 that makes a block of x.x.x.192 through x.x.x.200. Based on this I configured x.x.x.199 under supplemental networks. (IP Address and subnet)
I set the new public IP given by AT&T (x.x.x.199) as the address for the WAN interface, and tried setting x.x.x.1 as gateway, and 126.96.36.199 as DNS. This does not allow me to browse the internet at all. I can't access my SSLVPN either.
I then configured the WAN port as x.x.x.198 and gateway 99.x.x.1 and although it is not "technically" correct.. I can reach the internet.
However, this configuration also does not allow me to reach my SSLVPN.
I wonder.. how exactly should I configure it with the new static IP block, so I can acess internet and my SSLVPN?
I will appreciate any help you can provide.