Uniquely for you. Preorder the new Google Pixel 6.
u35828's profile

Tutor

 • 

5 Messages

Sun, Dec 23, 2012 6:26 AM

U-verse ADSL+ CPE Question

Has anyone tried using a Cisco 1800/2800 configured with an HWIC-1ADSL module to connect to the U-verse standalone Internet service, or will AT&T not allow anything other than their required gear?

 

FYI, I am switching from AT&T DSL Pro to the U-verse Elite 6M service, purchasing the 2Wire 3600HGV device.

 

TIA

John

Accepted Solution

Official Solution

SomeJoe7777

Expert

 • 

9.4K Messages

9 y ago

No other VDSL device will come up on AT&T's network other than their 2Wire units.  They perform 802.1x authentication using an X.509 certificate that's in their firmware.  VDSL interfaces without the certificate will come up with a VDSL signal but won't get network access.

 

Use the 2Wire 3600 with the DMZ mode, and put your Cisco behind it, it will work very well.

 

DMZ mode instructions are here:

 

http://forums.att.com/t5/Residential-Gateway/U-verse-for-BUSINESS-2Wire-3600HGV-bridge-mode-or-another-AT-amp/m-p/2707755#M182

 

A representative Cisco IOS configuration for a 2800 is 2 posts below that.

 

Tutor

 • 

5 Messages

9 y ago

Thanks for the heads-up.

Need help?
New to the AT&T Community? Start by visiting the Community How-To.
New to the AT&T Community?
Visit the Community How-To.