New Member
•
3 Messages
Pace 5268AC error when changing DHCP Network Range
I am trying to limit the address pool for my local network on my Pace 5268AC. When I try to set the address range manually, I get an error saying "The manually configured DHCP range is not within the specified subnet." I'm attaching a picture with the settings I'm using.
Accepted Solution
Official Solution
ATTHelp
Community Support
•
231.3K Messages
1 year ago
Hello, @MOUS! We understand that you are having trouble with limiting the address pool on your modem.
We suggest you reset your Wi-Fi gateway back to original settings.
Also, from the screenshot you sent us, the First DHCP address is 192.168.1.0, we suggest raising the lower range to 192.168.1.50.
Please let us know if that helps.
Faith, AT&T Community Specialist
0
MOUS
New Member
•
3 Messages
1 year ago
Thanks Faith, that was what I needed to know. The "First DHCP Address" and "Last DHCP Address" are the addresses that are removed from the address pool. Also, the "First DHCP Address" cannot be zero.
0
ATTHelp
Community Support
•
231.3K Messages
1 year ago
You are welcome, @MOUS!
Just to confirm, did you change the "First DHCP Address" from zero? We are asking, so we may know if that helped with limiting the address pool for your gateway.
We look forward to hearing back.
Faith, AT&T Community Specialist
0
0
MOUS
New Member
•
3 Messages
1 year ago
Hi Faith,
Yes, I changed the "First DHCP Address" to 192.168.1.120 and that worked. Thanks again for your help.
0
0
ATTHelp
Community Support
•
231.3K Messages
1 year ago
Hi, @MOUS! Thank you for reaching back out!
We are happy to hear the steps we provided helped.
If you need assistance with anything else, do not hesitate to reach back out to us.
Thank you for choosing AT&T!
Faith, AT&T Community Specialist
0
0