Contributor
•
1 Message
Need help configuring router to allow VOIP calls using SIP software
I tried using a dialer program that requires the router to be configured to use SIP. How do I make this happen?
At this time, the dialer program just shuts down intermittently and/or has limited audio.
I have uVerse router 5268AC FXN.
Help or advice much appreciated!
Rose
West Palm Beach FL 33414
ATTHelp
Community Support
•
215.6K Messages
6 years ago
Hello there @rosestrain!
This is an excellent question you have brought to our attention. I can understand your concern in regards to getting this setup for all your calling needs! I will be pleased to assist you further.
Your router has an option to select "Application Type", this is in regards to customizing port-forwarding settings. You can click Application Type to select what SIP type you wish to use with your dialer program. I would also suggest checking with your dialer program to ensure the most compatible SIP type is selected.
Let us know how it works out!
Shenoah, AT&T Community Specialist
0
0
sanjay.mnukonda
Contributor
•
1 Message
5 years ago
hi how to enable sip port
0
0
spoom2
Expert
•
18K Messages
5 years ago
You might want to start a new topic in the proper forum. SIP isn't going to work until you have service with a SIP provider. I'll move this to the Internet forum, but I think you need to provide more detail.
0
0