Mentor
•
14 Messages
PACE 11.1.0.531418 DMZ Issue
I put my router behind the PACE gateway and set the router as DMZ. The latest firmware is crapping out my fiber connection where I'm only able to get 50mbps down and 1-200 up. I thought it was my router crapping out, but apparently when I connect any other device directly to the gateway, I'm able to pull 940mbps up and down. I swapped an older router and placed that device in the DMZ And it starts acting up and the previous router started working normally.
Can someone look into this?
MTRougeau
Contributor
•
1 Message
5 years ago
Can confirm the new firmware works for me as well. DMZ+ speeds are back to normal.
0
madcitydan608
Tutor
•
2 Messages
5 years ago
I have upgraded to the 11.2.1.531810 firmware and I am still getting WiFi call drops.
1 Attachment
Screen Shot 2019-06-16 at 10.54.30 PM copy.jpg
0
madcitydan608
Tutor
•
2 Messages
5 years ago
I called ATT and they were sending me an 'upgraded' modem. Open the box and get a 5268AC with 11.1.0.531418 installed.
So frustrating
0
0
tbuck128
Teacher
•
27 Messages
5 years ago
after that
0
0
atlr
Teacher
•
7 Messages
5 years ago
Thank you for this, @Transponder .
Everyone else, AT&T.router.IP.address/upgrade
O M F G, AT&T !
0
0
dsl_user2
Contributor
•
1 Message
5 years ago
My 5268 recently received the 11.2.1.531810 update, but it broke my DMZ+ setup (ASUS RT-88U) that had previously been working. Internet connectivity stopped working for all clients connected through the ASUS router, but they could access the internet directly from the 5268. An inspection of the 5268 firewall log revealed that it was seeing the traffic from my router's IP address as a "TCP flood" attack from *inside* the network and (I assume) administratively blocking all traffic from that IP after a few seconds which effectively disabled Internet access. Had to downgrade to 10.7 to get it working again.
Has anyone else experienced this issue?
0
tbuck128
Teacher
•
27 Messages
5 years ago
this gives me pause. thanks for sharing this, hopefully it's a one-off but
knowing how AT&T operates I don't have much hope.
0
0
laestrella
Teacher
•
6 Messages
5 years ago
I upgraded and speeds are back to normal in dmz+ mode but then all my wifi calls drop.
Not sure what to do at this point.
0
septer012
Teacher
•
10 Messages
5 years ago
0
laestrella
Teacher
•
6 Messages
5 years ago
Thanks for confirming. I've gone back to allowing individual applications through the firewall.
0
0