Skip to main content
AT&T Community Forums
deteria

Mentor

 • 

14 Messages

Wed, Oct 31, 2018 4:12 AM

PACE 11.1.0.531418 DMZ Issue

I put my router behind the PACE gateway and set the router as DMZ.  The latest firmware is crapping out my fiber connection where I'm only able to get 50mbps down and 1-200 up.   I thought it was my router crapping out, but apparently when I connect any other device directly to the gateway, I'm able to pull 940mbps up and down.  I swapped an older router and placed that device in the DMZ And it starts acting up and the previous router started working normally.

 

Can someone look into this?

Responses

Teacher

 • 

10 Messages

a year ago

Good news, Firmware 11.2.1.531810 seemed to resolve the DMZ speed.  I cant fully test because I don't have Ethernet wired up at the moment, but over my WIFI:

Ping ms 6
Download Mbps 220.45
Upload Mbps 295.69
Swerved

Mentor

 • 

31 Messages

a year ago

Let us know how it turns out..

Tutor

 • 

3 Messages

a year ago

I just loaded it and set up DMZ+ and I am getting 920/940 Mbps with the DMZ+ enabled. Still testing for other things but it seems like it works.

Tutor

 • 

2 Messages

a year ago

Does WiFi calling works, or any other VOIP phone system that is behind your internal router ?

Teacher

 • 

10 Messages

a year ago

Wifi calling and Sms not working for me.   Investigating a bit. 

Mentor

 • 

26 Messages

a year ago

I had rolled my 5268AC a while ago to 10.5.3.527283-att awaiting the new firmware 11.2.x

 

I just checked and the system is still on 10.5 above meaning ATT hasn't pushed the 11.2 firmware discussed here automatically. Has anyone seen their 5268AC auto update yet?

Tutor

 • 

3 Messages

a year ago

I called and talked with a representative for about an hour trying to get them to force an update but the only thing they would do is re-initialize the gateway. I manually updated the gateway myself.

Tutor

 • 

3 Messages

a year ago

I use Voipo and it seems to work fine. I have only made person to person calls on it. I have not tried any of the other features yet.

Tutor

 • 

5 Messages

a year ago

Did this really work for people? My speeds are still trash. Still getting like 1.0 Mbps up on my PS4. Hardwired with nothing else even on. Makes no sense.

Transponder

ACE - Scholar

 • 

458 Messages

a year ago

If it's not working I would recommend a full systems reset on the gateway. 

Award for Community Excellence 2019 Achiever*
*I am not an AT&T employee, and the views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Contributor

 • 

1 Message

a year ago

Can confirm the new firmware works for me as well. DMZ+ speeds are back to normal.

Tutor

 • 

2 Messages

a year ago

I have upgraded to the 11.2.1.531810 firmware and I am still getting WiFi call drops.

 

Screen Shot 2019-06-16 at 10.54.30 PM copy.jpg

Tutor

 • 

2 Messages

a year ago

I called ATT and they were sending me an 'upgraded' modem.  Open the box and get a 5268AC with 11.1.0.531418 installed.

 

So frustrating

tbuck128

Teacher

 • 

27 Messages

a year ago

i'm pretty sure you can just install 11.2.1.531810 and it will be fine
after that

Teacher

 • 

7 Messages

a year ago

Thank you for this, @Transponder .

 

Everyone else, AT&T.router.IP.address/upgrade

 

O M F G, AT&T !

Get started...

Ask a new question