Micro Cell fails to activate
I have an interesting issue with the microcell. ATT has not been much help. I have the cell connected to my network and my network device config is as correct as I know to make it. Activation fails, just sits with the singal bars light flashing. So I use network packet analyzer and watch as I restart the cell. After GPS lock, the cell tries to contact 188.8.131.52 on port 443. This I expected as it was indicated as an early step in the process by some posts I read. However, the attempt to connect to this IP address times out. There is no reply from 184.108.40.206. The cell will retry this address and 220.127.116.11, which is apparently shutdown as I get an ICMP for that indicating it is blocked on purpose. A tracert of 18.104.22.168 shows the route going into series of att servers and finally to 22.214.171.124 and then the tracert times out.
Now it seems if this connection is not made, activiation cannot proceed. ATT ignores this and runs me through all kinds of other stuff before telling me my connection speed is too low and that is why it fails. Really?
ATT did confirm that 126.96.36.199 is the correct IP but thats about all I got out of them.
Any ideas on why I am not getting any further than the failed connect to 188.8.131.52:443?