Is the MicroCell Service Down?

The 3G light has been flashing green almost 24 hours now. I have tried unplugging/recycling microcell but still have no microcell service. I don't know what number to call to inquire about status of a tower.

I have had flashing 3G lights almost 24 hours now and am frustrated. It has worked perfectly for 2 years. I have recycled numerous times to no avail.

I know several people in the East Texas area experiencing the same issues as described. 

---

@AnClar wrote:

Just tried another experiment...I moved the MCell to a window with a clear view of the sky...device would still not get a GPS lock after an hour.  I checked on the MCell management page, and my device is still listed as activated.  I'd sure give a lot to know what the heck is going on.

---

Just for the record, the proper location for a MicroCell is within 18" of a window with an unobstructed view of the sky. I believe that's mentioned in the instructions. Also, keep it about 2' away from a WiFi source (i.e. wireless router). You can place the MicroCell away from a window if you connect an external GPS antenna to it. The MicroCell needs to have continous GPS lock (access to the sky) to work properly.

Ok. It does sound like it's an AT&T issue because of the flashing green 3G light. If you haven't moved the MicroCell away from a window (which you should never do once GPS lock is achieved) then you'll just have to ride it out, which sucks. GPS lock is not only critical for tower communication (frequency setting, etc), it's also necessary to confirm GPS coordinates for AT&T tower location (confirmation), E911, etc.

Only reason I mentioned this is because the location I've always had it in, on a table near my computer, has worked just fine for over a year now.  I've never had a problem with getting GPS lock from that location until today.  Just wanted to see if anything related to GPS might be causing a problem.  From what I'm seeing here, seems that AT&T has acknowledged a problem with MCell service in Texas.  All I can do now is to wait until they get it resolved and see if that fixes the GPS lock issue as well.

I'm experiencing the same issues in San Antonio.  First 3 lights on solid, the 3g light (the light with the bars) is flashing.  

Started about 10pm last night.  Powercycled microcell, modem & router.  ISP is uverse.

---

@AnClar wrote:

Only reason I mentioned this is because the location I've always had it in, on a table near my computer, has worked just fine for over a year now.  I've never had a problem with getting GPS lock from that location until today.  Just wanted to see if anything related to GPS might be causing a problem.  From what I'm seeing here, seems that AT&T has acknowledged a problem with MCell service in Texas.  All I can do now is to wait until they get it resolved and see if that fixes the GPS lock issue as well.

---

Well just hang in there and hopefully it won't take too long to get resolved. I did send a pm to CustomerCare about the lack of information but it appears that they are starting to acknowledge the outage.

I made a quick call to AT&T customer care at 1-800-331-0500 and they quickly acknowledged the outage covering several areas across Texas.  Very helpful folks!

Support does seem to be getting more responsive once THEY are notified by the system engineers that there is a problem. Let's hope that this trend continues.

I  am in arkansas and my mcell is down also, never had a problem with and all of sudden this morning went to make a call and had no bars, tried recycling and all nothing, all lights are green but the bars are flashing green. Maybe they will fix this soon.

Report it to Customer Care at the number that moleman_42 posted above. If there aren't any complaints, then AT&T might not be aware of an outage in your area.

I just noticed my M-Cell is back online and my phones are connected! -East Texas