New Member
•
1 Message
AT&T micro cell Model DPH151
My micro cell comes on with "power" only light. I tried plugging it directly into an outlet and still no change. Please help
Dennis (Edited as per community guidelines) [email scrubbed]
New Member
•
1 Message
My micro cell comes on with "power" only light. I tried plugging it directly into an outlet and still no change. Please help
Dennis (Edited as per community guidelines) [email scrubbed]
OttoPylot
ACE - Expert
•
24.2K Messages
4 years ago
Check the ac adapter with a voltmeter. It should read 16VDC +/- 0.5 with no load. It could be that the adatper is failing and not delivering adequate power to the radios and/or board. A green power light just means that current is detected. It is not an indicator of adequate current.
The DPH-151 is also the original model. It could also mean that the unit itself has finally died. They can't be repaired and AT&T stopped selling them at the end of 2017 because the MicroCell has reached its EOL. The service itself will be shutdown as well because AT&T is transitioning away from their 3G network. Shut down will probably be around Feb. 2021 and certainly by early 2022, if not sooner.
0
0