04-08-2013 06:38:55 AM
I did look through the forums and did not find a question that matched mine (though some were similar).
We had UVerse TTL home dvr package installed over the weekend. Two receivers, Rec1 is next to the wireless signal thingy. Rec2 is in a room across the house.
Rec2 picks up television just fine. Rec2 does not show any of the recordings.
Rec1 shows the recordings (which is odd since I set them to record from Rec2).
It seems to me that if it is getting the live programming it is set in a position to pickup the recordings. Am I missing something?
Is this a matter of a reboot/restart?
Thanks in advance for any insight you can provide.
04-08-2013 06:42:32 AM
Try rebooting the DVR and then the STB in question.
04-09-2013 06:27:35 AM
Is rebooting and restarting the same thing?
I did restart both machines and it did not fix the issue. I did some of the on screen troubleshooting and I thought it said it was rebooting both machines (which also has not fixed the issue).
As a test I also added two new recordings from receiver 2. They are on my list of scheduled recordings, they did record and list on receiver1/DVR. However, receiver 2 still shows that they are no recordings.
So (sorry to be such a newbie) but if a restart and reboot are two different items how do I manually reboot these items? (As I didn't see reboot listed in any of the menu items)
Thanks in advance
04-09-2013 07:20:05 AM
Unplug the power from the RG (modem), DVR and all STBs.
Replug the RG and wait for all green lights. THere will be a short time that there may be both red and green. Wait for all green.
Plug in the DVR. Watch the associated TV & wait for a picture.
Same for each STB, one at a time. This sequence is to assure that all the components are working together.