05-14-2013 06:54:26 PM - edited 05-14-2013 06:57:24 PM
Anyone know what the good HPNA power levels are like? What are the things such as 1 > 2? Also, how do I tell which "Station(Receiver?)" is which?
I did an "Extended Test" and got this:
|Station to Station HPNA Performance||PHY Rate (Mbps)||SNR (dB)||Rx Power Level - dB||Packet Error|
|1 > 2||112||41.9||-11.2||0|
|1 > 3||112||41.9||-12.8||0|
|2 > 1||128||40.9||-9.3||0|
|2 > 3||112||41.9||-21.1||0|
|3 > 1||128||40.8||-10.2||0|
|3 > 2||112||41.9||-20.5||0|
Solved! Go to Solution.
05-15-2013 12:16:35 PM - edited 05-15-2013 12:18:59 PM
112 and above are proper PHY Rates, the only stat that really matters in HPNA connections.
To figure out which ones are which, about only way is to disconnect a connection and it would show up in the table. That way you would then know which # is which location.
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? 1-800-288-2020, After he gets acct info, press # a bunch of times, get a menu from Mr. Voice recognition
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more
05-15-2013 07:50:35 PM
I'm guessing 1 > 2 means "doohicky 1 going to doohicky 2". It would be a lot clearer to use something like "1 -> 2"
No no, 1 is now greater than 2(Mind blown)!
I originally figured it just meant "From - to -" too.