Welcome to the new AT&T Community
We've got a fresh look! Take the tour to see what's new.
I'm setting up a new wireless router that's connected directly to my RG. The router gets its "WAN" ip from the RG - in this case 192.168.1.85. The default "LAN" ip is on a different subnet - 192.168.0.x. But this creates problems with my wireless devices not being able to access the rest of my network. So, I try to change the LAN ip address of the router to a 192.168.1.x number, and I get the error: Error Code 5008. WAN IP address and LAN IP address cannot be in the same subnet. Please input another IP address."
I've setup routers like this before without any problem. Does anyone know how I can get all my devices on the same subnet? The router is a TP-Link N750.
Solved! Go to Solution.
Check this one from Computer Joe:
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems) or ATT Customer Care (all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more
SomeJoe - I guess I should have known that since the link was me asking the same question 2 years ago. Anyway, it works fine when I set it up that way.
Sign up now to post, reply, and join the conversation.
© 2014 AT&T Intellectual Property© 2014 AT&T Intellectual Property link. This link will open a new window All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. AT&T 36USC220506