Reply
Posted Aug 25, 2013
7:40:54 PM
View profile
Motorola VAP2500

Hi 

    I have the  motorola vap 2500 wireless access point  from ATT.  I found that it does have a web configuration interface. But I do not know the login and password. I have tried  all the userid/password combinations out there in the web for motorola devices.  But nothing has worked. Thinking of using hydra at this point.

   Btw, I did reset the device as well.

 

If anybody has any knowledge of how to login to the Motorola VAP 2500,

 

Thanks

Satanand 

 

 

Motorola VAP2500

14,786 views
16 replies
(3) Me too
(3) Me too
Post reply
Replies
(16)
0
(0)
  • Rate this reply
View profile
Aug 26, 2013 5:24:59 AM
0
(0)
ACE - Master

satanand wrote:

Hi 

    I have the  motorola vap 2500 wireless access point  from ATT.  I found that it does have a web configuration interface. But I do not know the login and password. I have tried  all the userid/password combinations out there in the web for motorola devices.  But nothing has worked. Thinking of using hydra at this point.

   Btw, I did reset the device as well.

 

If anybody has any knowledge of how to login to the Motorola VAP 2500,

 

Thanks

Satanand 

 

 


 

 

As far as I know the VAP2500 is not a standard access point. It's supposed to be used with the Uverse wireless TV receivers, and should be preconfigured for that purpose.

 

I don't think there is an actual log in/user ID. If you are connected to your gateway via an Ethernet cable, you should be able to access the VAP2500 user interface by typing it's IP address into your browser. The password for making configuration changes should be printed on the VAP2500 somewhere.

 

 

 

 




__________________________________________________________
How can you be in two places at once, when your not anywhere at all?
------------------------------------------------------------------------------------------------------
I really want to become a procrastinator, but I keep putting it off.
------------------------------------------------------------------------------------------------------
There are three kinds of people, those that can count, and those that can't.
------------------------------------------------------------------------------------
“Our great democracies still tend to think that a stupid man is more likely to be honest than a clever man, and our politicians take advantage of this prejudice by pretending to be even more stupid than nature has made them." :Bertrand Russell

                               neon_sign.jpg

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Motorola VAP2500

2 of 17 (14,720 Views)
0
(0)
  • Rate this reply
View profile
Aug 27, 2013 7:39:52 AM
0
(0)
ACE - Guru

Try:

User: ATTadmin

Password: 2500!VAP

 

Worth a try... I guess :/.

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Motorola VAP2500

3 of 17 (14,680 Views)
0
(0)
  • Rate this reply
View profile
Sep 22, 2013 1:07:39 PM
0
(0)
Contributor

it is preconfigured. But I want to change the operating channels in 5 GHz.  It does have a web configuration interface.

 

and the userid and password are not printed on it.

 

Regards

satanand

Re: Motorola VAP2500

4 of 17 (14,353 Views)
0
(0)
  • Rate this reply
View profile
Sep 22, 2013 1:08:14 PM
0
(0)
Contributor

Well thats the first one I tried. It does not work.

 

Regards

Satanand.

Re: Motorola VAP2500

5 of 17 (14,351 Views)
0
(0)
  • Rate this reply
View profile
Nov 14, 2013 3:34:27 PM
0
(0)
Tutor

I've also found that resetting the device does not work. I can't find anything online that has the correct default login info. I'm showing 2 wireless receivers connecting when I only have one. I'd like to block the 2nd device or even set mac filters or something for those.

Re: Motorola VAP2500 Login

6 of 17 (13,244 Views)
0
(0)
  • Rate this reply
View profile
Nov 15, 2013 7:45:55 PM
0
(0)
Contributor

Satanand - did you try Hydra? What did you find out?

Re: Motorola VAP2500

7 of 17 (13,204 Views)
0
(0)
  • Rate this reply
View profile
Nov 21, 2013 12:07:57 PM
0
(0)
Tutor

Normally I'm fairly caught up with different network tools, but I can't figure out what Hydra is for the life of me.  I know someone used to keep a public list of default passwords, but I can't remember that site either.

 

Also, I'm not sure if I should start a new thread or just stay here, but other than running a free wireless network scanner, does anyone know of a way to tell what the VAP2500 is using?  2.4ghz, and channel? 5ghz and channel?  Does it broadcast and ID?  I hate not having good documentation or access to the configuration.

 

Like many people I run a router behind the RG for GigE and 802.11n, and I like to know how my equipment is layed out.

 

Thanks for any info,

 

Jim

Re: Motorola VAP2500

8 of 17 (13,066 Views)
0
(0)
  • Rate this reply
View profile
Nov 21, 2013 12:13:28 PM
0
(0)
ACE - Master

It uses normal 802.11n channels in the 5 Ghz frequency space.  I'm sure it dynamically selects a channel based on conditions.

 

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Motorola VAP2500

9 of 17 (13,064 Views)
0
(0)
  • Rate this reply
View profile
Nov 21, 2013 12:28:17 PM
0
(0)
Tutor

Thanks JefferMC, it's just too bad they don't provide the current information on the homepage the same as the RG.

Re: Motorola VAP2500

10 of 17 (13,059 Views)
0
(0)
  • Rate this reply
View profile
Nov 22, 2013 12:12:29 PM
0
(0)
ACE - Guru

The VAP can be seen on inSSIDer. It used 5 GHz with 4x4 N(600 Mbps). It can use the newer 5 GHz channels from what I saw 52+58 and 108+112(Probably more, but I haven't had the chance to see it use more than those others).

 

It broadcasts with the network name "MotoVAP_xxxxxxxxxxxx"

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Motorola VAP2500

11 of 17 (13,010 Views)
0
(0)
  • Rate this reply
View profile
Nov 24, 2013 11:50:18 PM
0
(0)
Tutor

@Darknessrise, thanks for inSSIDer.  I've used netstumbler for years, and it is nice to have a new app to try.  

Re: Motorola VAP2500

12 of 17 (12,920 Views)
0
(0)
  • Rate this reply
View profile
Feb 20, 2014 1:59:14 PM
0
(0)
Tutor
I discovered, with some help, that the 2nd device connecting (the 2nd mac address that has its own ip and serves no purpose that I can see) is most likely a 2nd device on the 1 wireless receiver that only connects when using the receiver via the wireless access point. So, if you plug it in directly to the router, and not use the access point, it goes away. However, so far nobody has been able to explain to me what it is and what is does.

Re: Motorola VAP2500 Login

13 of 17 (10,672 Views)
0
(0)
  • Rate this reply
Apr 24, 2014 8:37:06 AM
0
(0)
Tutor
What is the default log in address? For Netgear the router log in address is 192.168.0.1.

Re: Motorola VAP2500

14 of 17 (8,893 Views)
0
(0)
  • Rate this reply
View profile
Apr 24, 2014 8:46:54 AM
0
(0)
ACE - Master
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Motorola VAP2500

15 of 17 (8,890 Views)
0
(0)
  • Rate this reply
View profile
Apr 26, 2014 5:33:16 PM
0
(0)
ACE - Guru
Edited by Darknessrise on Apr 26, 2014 at 5:35:03 PM

smith.infosystems wrote:
What is the default log in address? For Netgear the router log in address is 192.168.0.1.

Are you talking about the VAP2500's default login? The login for it would be whatever IP address it has been assigned by DHCP. However, the username/password are currently unknown.

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Motorola VAP2500

[ Edited ]
16 of 17 (8,788 Views)
0
(0)
  • Rate this reply
View profile
Aug 20, 2014 3:53:17 PM
0
(0)
ACE - Guru
Edited by Darknessrise on Aug 20, 2014 at 4:38:56 PM

Darknessrise wrote:

Try:

User: ATTadmin

Password: 2500!VAP

 

Worth a try... I guess :/.


The mystery has been solved thanks to some amazing people at Dslreports.com!

 

It's -

User:ATTadmin

Password:2500!VaP

 

I was so close, yet so far....

 

 

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Motorola VAP2500

[ Edited ]
17 of 17 (4,818 Views)
Share this post
Share this post