10-02-2011 08:47:17 PM
You're showing no uncorrected blocks or or other signal loss errors, which is great. I'd say your line looks to be fixed.
10-05-2011 06:32:43 PM
10-10-2011 12:35:05 PM
My wife called me this morning to tell me that the TV and Phones are working, but that the internet is not.
When I get home from work, I'll investigate, in the mean time, does anyone know of any outages or localized problems in the St. Louis Area?
10-11-2011 06:03:06 PM
we had a vrad port go out - they fixed everyone and my stats went from 38K (32/5 profile 2200ft) to 45K (32/5 profile 2100ft) - same wires. i was barely on 32/5 and now i have 87% (before as high as 110% overallocated) 3801 was the only way to get 32/5 profile the 3800 couldn't do it back then.
10-12-2011 06:35:59 PM
Sorry for the delay'd response. By the time I got home, internet was working again. I checked all the router stats with UVRealtime but nothing showed up. In fact the error table was only showing about 2k corrected blocks.
I have no idea what happened.
Keeping an eye on things.
12-19-2012 01:58:53 AM
Somejoe : Power Level" power level @ the house ? or Power level from the Vrad?
My Noise Margin and attenuation can be improve right?
It's only 15 foot of cat5 running to the router: thanks for checking it outl
12-19-2012 10:36:03 PM
Your line looks like you may have an attenuator installed because you're very close to the VRAD. The values reported are normal for an installation with an attenuator.
I don't think anything needs to be done. To verify, just watch the error table to ensure that an unusual number of errors aren't accumulating.