02-05-2011 03:14:07 PM
Here's a guide on how to Program the AT&T Universal Remote Control to your TV.
Click Here for the Link. It also includes the codes for different brands of TV. If the guide help you please put a FeedBack or Rate me on the guide website.
Previous Sup - AT&T Uverse
Solved! Go to Solution.
02-26-2011 07:19:05 AM
You need to try the codes to see which one works for your TV.
02-26-2011 02:02:13 PM
You can also try the App on your TV:
Menu > Help > System Setup > Program Your UV Remote
03-19-2011 03:02:17 PM
I have a Samsung TV and a seperate Samsung Sound bar. How do I program the U-verse remote to turn the TV on and off, but the volume is the sound bar. Don;t see a code for sound bar that I guess I would program under Aux.
03-19-2011 10:38:49 PM
Take a look in this post for other codes that might work.
08-28-2012 04:19:09 PM
I have programmed the u-verse to turn my Sony receiver on and off, only one of the codes work. However, it will not adjust the sound through the receiver, it adjusts the volume on the tv. I seem to remember having to do something with the cable remote previously. Please help!
08-28-2012 06:17:34 PM
Press att/ok - 955 - att-enter to have the volume always control the STB.
If you leave out the att button the control will follow whichever mode button is pressed. Since you want the att button to be active to change channels this may be a good choice.
Just curious why you want the STB control instead of the TV.
08-29-2012 08:52:32 AM - edited 08-29-2012 09:38:37 AM
dyoung78 - Rereading your post I think your request was for an HT like amplifier/receiver. not the STB. Been reading too many posts where people call the STB a receiver.
But the answer is the same - If you press the aux button the volume control will always be the Sony. No mode button & you need to press the aux button while watching to control the Sony.
How about turning everything on at once? Code - 977.
Press att/ok- 977- att- tv-dvd-aux -enter Then one power push turns everything on.
02-25-2013 11:31:28 AM
Here is an article that discusses programming your remote control: http://www.att.com/esupport/article.jsp?sid=KB4079
As of May 1st, I am no longer serving as the Community Manager for AT&T. This account will no longer be able to accept private messages. If you have an account related issue, please send a private message to ATTCustomerCare.
Did a post have a solution that worked for you? Help other people find solutions faster by marking posts that helped you as an "Accepted Solution". Learn about accepted solutions here.
I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.
03-21-2013 06:48:32 AM
How about a Logitech Harmony? Least expensive is a model 200 refurb at newegg.com, $18 incl shipping.
I have recommended to many people that were unable to find codes to support their devices with the U-verse remote that they get a Logitech Harmony remote.
Many of those people feel they do not want to, or should not have to, spend their own money for a remote.
Others, have a very complex setup and are willing to spend their money to maximize their viewing experience.
The U-verse remote is effective for some subset of basic control functions on the most popular equipment, The Harmony provides full control of complex setups across a broader range of equipment.
Until sometime in 2011 the Harmony only offered expensive models (over $100). In 2011 they introduced the model 300 ($30) followed by the model 200 ($20). These only support one activity (Not many for a Harmony, but same as U-verse) - Watch TV.
This writeup shows that, even though the basic descriptions sound the same, there are functional advantages to the Harmony. The question is - Is it worth spending $$ for the Harmony.
Basic Similarity (Logitech Harmony Model 300 vs. U-verse remote) -
Both can control four devices (STB, TV, DVD, Aux) under one activity - Watch TV.
Logitech Harmony Model 300 advantages -
Must be able to do something no other remote can do to convince you to spend $30 to buy it so Logitech can make a profit.
Monster library of supported devices built on budget for expensive remotes (amazing how libraries grow over the years).
You can predetermine support of make & model via web site (http://myremotesetup.com/EasyZapper/New/Main.asp?W
Since device support is defined in detail, a Logitech customer service rep (CSR) can help with any problems. When anything new comes out it can be added to your existing remote via download.
To program - Enter device make model in computer based wizard. When device is supported, all functions are supported. IR signals can be learned from device remote.
IR/function/button map - You can map any button to any function. You can pick buttons based on your preference, instead of someone else's. Logitech can add any new IR code format to function mapping via download. CSR can download changes that affect only you,
Watch TV button - Turns on/off programmed devices. Sets correct input. Ability to sequence devices and introduce delay between devices.
Change from Watch TV mode to individual device control with one button push and vice-versa. Same volume/mute buttons will affect different devices (STB, TV, HT) depending on device selected and the one user selected for the Watch TV activity. Note that the U-verse phantom mute can be un-muted with four logical button pushes - device mode, STB, mute, return to watch TV mode.
Able to buy more advanced remotes for more money - Each step up adds more devices, more activities(e.g. Watch OTA, Watch DVD, Watch TV with HT sound), more display (LCD screen) of functions & recharge-ablity .
Multiple activities appears to be a concept unique to the Logitech Harmony. It allows the same buttons to be programmed to different sets of inputs/functions/devices based on what the viewer is watching (i.e. an activity). The button map is unique to the activity. It can be as similar or different between activities/devices as you need it to be. Each activity has its own start up sequence to power up the selected devices & set inputs needed for continuity. It is especially valuable for complex setups and/or people with only basic knowledge of the operation of the remote.
U-verse remote limitations -
U-verse remote is provided free to watch U-verse TV. Support for some functions on some other devices is included so that it can be called "universal". But there is no business driver to spend money to assure full support of all functions on all possible devices .
Limited library of supported devices. Vague lists by type/mfgr. No model detail. No definitive/comprehensive list of codes. No "not supported" statement. If support is not accomplished, there is no way to find out if it should be supported until you find that the remote works for you. Since device support is not defined in detail, customer service rep cannot help with problems.
To program- Enter an arbitrary code that may be difficult (or impossible) to determine or step through every possible entry using the search method. Possibly finding some partially supported sets along the way. No IR learning.
IR/function/button map - Button/IR map cannot change (need new physical remote). IR/function map can only change if U-verse globally changes STB software. No ability to provide individual tuning.
Watch TV (ATT/power) - Turns on/off programmed devices. Does not set input. No ability to sequence devices or introduce delay.
Default mode of operation is Watch TV (Channel change on STB, Volume on TV, Power up STB/TV). To vary operation requires reprogramming with more arbitrary codes applied to individual functions. No clear distinction between Watch TV and individual device control (i.e. It is difficult to change operation between Watch TV and controlling individual devices by programming with codes.)
To clear phantom mute - att/ok - 955 - att - enter - mute - att/ok - 955 - tv - enter. 12 button pushes, where two are two finger. If you can remember how to do it.
Point anywhere remote is the only extra cost upgrade - provides RF (with STB pairing) and learning IR.
05-14-2013 10:04:32 AM
You dont happen to know any additional codes for Bose Cinemate GS II by chance? Nothing seems to work. FINALLY was able to get the Samsung BluRay set up. A code not listed by Uverse. SBR Model BD-D6500 @ code 2483 thanks to a post I came across.
05-14-2013 10:20:55 AM
Google U-verse remote code for bose & you will get many codes to try. You did see my earlier post that you need to change the volume setting??
05-15-2013 04:42:17 AM