11-19-2009 03:51:13 PM
My son decided to switch TVs with us and we wound up with a Magnavox in our bedroom. This is just a TV, not a DVD combo set. OK, so I needed to re-program the Uverse remote for the TV.
Found the correct Magnavox 4-digit code in the Uverse remote pamphlet and was able to turn the TV on/off and control volume with the Uverse remote TV button on. Now here's where it gets puzzling.
When I press the AT&T button on the remote, the TV does NOT go on with the power button, but it does power off (after manually powered on) and the volume control works OK. All is good except for the TV not powering on. Once again, when the Uverse TV button is pressed, all the TV functions work fine. Other swapped out TV worked fine with same remote.
I tried a few other 4-digit codes w/no success. Wondering if anyone reading this has or had this sort of problem.
01-09-2010 06:27:08 PM
I'd have to say it's the wrong code as it won't power up the TV w/the remote power button. Try codes
from the latest list: http://www.att.com/support_media/images/pdf/uverse
Please NO SD stretch-o-vision or 480 SD HD Channels
1-800-983-2811 to avoid Mr. Voice Recognition
YRMV IMHO Simply a U-verse user, nothing more
11-28-2011 05:05:53 PM
I would like to thank everyone for taking the time to post your comments and opinions related to this topic. This topic has been thoroughly discussed and will now be closed. If you still have questions, please start a new topic.