A network status has changed

Never have seen that, but If the DVR functions are still not working, try a Non-Destructive Disaster Recovery.

Unplug the power cord of the DVR from the wall or from the back of the box and wait ten seconds. Plug the DVR back in.

When three white dots appear on the screen, unplug the DVR again. Repeat this process two more times.

Plug the DVR back in on the third time and leave in. Three white dots appear followed by a gear with a status bar at the bottom of the screen.

If the Disaster Recovery screen does not appear, repeat the steps above. If the Disaster Recovery screen appears, wait until completion.

If the Non-Destructive Disaster Recovery does not work, follow the steps for a Force Disaster Recovery

Will not erase any recordings, but will re-download all the software.  It will take a long time, but solves many DVR problems a reboot doen't fix.  Good luck 😉

Chris

_____________________________________________________

Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
or ATT Customer Care (all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more