01-16-2012 05:15:08 PM
My service is DSL without home phone. I used uverse high speed internet before DSL. When switch to DSL, it use same line inside the house to connect to DSL so I am very sure there's no problem on the wiring inside the house. The DSL modem doesn't close to TV or other electric device. Every time the DSL drop, the dsl light on modem turn red. I have contacted the tech support by chating and by phone. They run test and told me everything looks fine. However, the DSL still drop every hour. Can anyone tell me what's wrong? The modem is 2wire gateway 2701HG-B. Here is the Broadband Statistics on the modem:
StatisticsCollected for 20:44:43
Solved! Go to Solution.
01-16-2012 05:38:46 PM
The problem you're having is quite common, but yet never acknowledged. I have noticed this problem about four years ago when I recieved my first 2Wire modem device and playing intensive online gaming.
The 2Wire has a mechanism inside that is called a Firewall which protects the modem from oncoming attacks. However, the 2Wire is known for firmware issues in which the 2Wire will detect a false attack and cause the modem to shut itself down. An example of this would be a automotive with an burglar alarm system and a brush of wind causes it to go off.
The fix to this is fairly simple. You need to access your internet browser by placing in the URL : http://192.168.1.254
Click on the Firewall link icon which looks like a Lock at the top right of your interface. About a quarter of an inch down, you will need to select Advanced settings.
Note: You may or may not be prompted to put in a System Password... This password is for the configuration of your modem, if you don't remember it, select Forgot password and it will provide a hint. If you still cannot remember the password, select "Still cannot remember password" and you will be prompt to put in the System Key. To find this key, it will be location on the left hand side your modem in between two barcodes. It's a ten digit number surrounded by bracket signs. Create your password at this time and then go back to the Firewall, Advanced settings and place in the new password you've created.
On the next screen you will see on the right hand side an option that says Attack Detection -- Uncheck the option for "Packet Flood" and then hit save.
Once done, go back to the top icons and select Home Network, to the lower right you will see Edit Settings under Wireless Settings, click Edit Settings, proceed to the bottom of the screen and set Power Setting to 10... and Wireless Mode to B only.
Once done, click on the save feature and close out of the browser, reopen and it should fix the problem permanently.
01-17-2012 04:51:14 PM
Thanks so much for very detail and step by step instruction. I have done the changes on the modem. It did reduce the frequency. (I guess couple time dsl drop may caused by windy weather outside)
08-07-2013 02:06:29 PM
THis solution works! I had another tech walk it through for me. No more dropped DSL connections.
Question: Where do all the packets come from to introduce the packet flood condition? I would have thought there would be more bufferring to take care of this condition.
This solution should be way up on the lest of to-do items before anyone gets exasperated with ATT